Warning: Parameter 2 to qtranxf_postsFilter() expected to be a reference, value given in /homepages/28/d266452710/htdocs/clickandbuilds/plasmalaurentides/wp-includes/class-wp-hook.php on line 286
Soap-CO2 – how it works
By Ganssoap, and Benjamin (Ghana)
The skin is the largest organ of the human body. It not only protects the internal organs, but also reflects the emotional and physical state of our body.
When we make GaNS soaps, we incorporate PL-CO2, – CuO and ZnO; these ingredients not only clean, are antibacterial and anti-viral but subsequently create a plasma environment that continues to do the work to balance (give what is missing and remove what is too much). ZnO is especially indicated to treat skin diseases (eczema, psoriasis, etc.). The energy of both GaNS is stronger than the pathogens in the body.
And viruses/bacteria are not killed but their energy is completely exhausted. So if we add 1% soap, it increases the energy of the remedy (soap etc) so that it can exhaust the energy of viruses/bacteria: what remains are amino acids without the energy of viruses/bacteria.
It is also important to add fragrant herbs because they create a good relationship with the emotional, which is positive; below what ZnO does. Perfumes touch us emotionally.
It is also important NOT to incorporate amino acids floating on the surface of salt water into the production of GaNS – remove the GaNS by a syringe with a bottom tube to avoid touching the amino acids.
Soap science: to make soap, we use a fatty substance (amino acids) and by adding caustic soda, we transform the fatty substance into GaNS. The GaNS of soap separates the fat on our skin. It is not a chemical process but a nano-technological one. Like Cu-np with simple copper created from GaNS separated from metal – GaNS-soap (= Cu-np) acts with simple fat (=Single Cu) creating separate,’clean’ GaNS.
Tested for escherichia coli (E.coli), salmonella typhi and staphylococcus aureus. After 15 minutes exposure to soap all colonies were eliminated.
- Coconut oil (antimicrobial and antifungal, makes a hard bar that cleans and lathers well but tends to dry; no more than 30%)
- Tallow or palm oil (cholesterol free, high in antioxidants, unsaturated fats, vitamin A&K, no trans fat, easy to store, rich in nutrients; makes a hard bar with great cleansing properties. Use up to 50%.
- Olive oil (makes a softer bar that has wonderful moisturizing properties, but does not give much foam. Up to 50% is recommended)
- Castor oil (helps stabilize the foam created by other oils. Although it is recommended not to use more than 10%)
- Coconut butter (anti-aging properties, improves hair and skin quality through hydration, reduces inflammation, powerful antioxidant)
- Dilute NaOH in water
- Melt all oils in a bowl and mix.
- Add the water with the NaOH slowly, stirring until the mixture becomes thick.
- Add the desired fragrances
- Add the 3 GaNS waters (1ml), mix to make homogeneous
- Transfer to moulds, leave to mature for 4 to 6 weeks
CO2 shampoo bar
A shampoo bar is more ecological than liquid shampoo because it doesn’t need a bottle and you can make it entirely of organic ingredients!
Wearing your protective gear, pour water into your glass bowl/jar for mixing. In a well-ventilated area, slowly add 142g lye to 340g LP-CO2.
Measure all oils and combine in a non-reactive pot or Crockpot and begin to slowly warm the oils to 37-43ºC
283g coconut oil (makes a nice hard bar that cleans and lathers well but has a tendency to dry out; no more than 30%)
283g oz tallow or palm oil (makes a hard bar with great cleansing properties. Use up to 50%
283g olive oil (makes a softer bar that has wonderful moisturizing properties, but does not give much of a lather. Up to 50% is recommended)
170g Castor oil (helps stabilize the lather created by the other oils. While it is recommended to use no more than 10%)
Same temperature for oils and lye-water. Slowly add water/lye mixture to your oils. Use a stick blender to begin mixing until trace is achieved. You can tell when you have reached trace when your mixture is still fluid, but a drop or drizzle of the soap mixture stays on the surface for a few seconds before falling back in.
Add 42g essential oils if you are using them.
Pour the mixture into your soap mold. Cover your soap mold with an upside down cardboard box and cover with a towel to keep it warm for 24 hours. If your home is particularly warm you may not need the towel. If it gets too warm it could crack which I don’t think would cause a problem but your soap won’t be as pretty.
Remove your soap from the mold and slice it. I cut mine about 1 inch thick as this is a nice size. You should get about 12 bars. Stand your bars up and let them cure in a well-ventilated area for about 4-6 weeks and then enjoy!
Mix heated liquid beeswax with PL-CO2; fill in mold and let cool down
By Linda Limetree
“Vanilla Sky” is composed of bicarbonate, citric acid, Epson salt, coconut oil, and contains a good dose of Moringa, Chia seeds, GaNS quince powder, to strengthen your vitality. I added vanilla essential oil that has antioxidant, aphrodisiac, anti-cancer, febrifuge, antidepressant, sedative, tranquillizing, and relaxing properties and a mild odor.
“SeaShell” is composed of sodium bicarbonate, citric acid, coconut oil, peach kernel oil, vegetable glycerin, and contains a good amount of magnesium, GaNS calcium powder for a GOOD BONE STRUCTURE, as well as citronella essential oil which has antidepressant, antimicrobial, antipyretic, astringent, bactericidal, anti-fungal, sedative and tonic analgesic properties!
“Winter sunrise” consists of sodium bicarbonate, citric acid, coconut and peach kernel oil, sea buckthorn oil, and contains a good amount of magnesium powder GaNS for CELLULAR REGENERATION, starch, natural salt, clove oil, – an antiviral, blood purifier, increasing resistance to a multitude of diseases due to antioxidants in its oil.
“Earth Bond” is made of Dead Sea salt magnesium, French green clay and containing a good amount of copper GaNS for DETOXIFICATION, starch, natural salt, unrefined sugar, and essential oil of verbena antiseptic, aphrodisiac, digestive, emollient, insecticide, sedative, and tonic.
Before putting your bath can in warm water, take a hot shower with plasma soap or other, to open the pores of the skin, keep the body warm by wrapping yourself in a bath towel, then enter the tub, relax and add your bath can in the water. Stay in this fresh, aromatic water for at least 20 minutes. You can use this time to make yourself a clay mask.
The surface of the water will be covered with small bubbles of coconut oil, in the exact amount to give your skin a satiny finish after bathing and will prolong the action of minerals in your skin.
Dry your body with a soft, warm towel and go to bed to feel the refreshing effect of this Bath Bomb!
Use only once a week.
By Urszula and Plasma-Laurentides
- 4 tbsp white clay
- 1/4 cc sea salt
- 4 cc of PL-CO2
- 1 cc of Nanobio
- 1 cc coconut oil
- 1 cs diatomaceous earth
- a few drops of the essential oil according to your taste (cloves, thyme, mint, eucalyptus, etc)
Mix flower or herb hydrolates with PL-CO2
Plasma skin lotion
Incorporate PL-CO2 into your favorite lotion; try before with a small amount that the PL mixes well with the lotion. Use it as often as you like.
The following recipe shows you how to make a basic lotion on your own:
- Melt 1/4 cup beeswax in 1 cup of oil (sunflower, grape seeds).
- Bring 1/2t of water to a boil and dissolve 1/8 cc of borax in this water.
- Slowly add the water to the oil while stirring with a whisk; when the temperature is low enough, add 18 drops of lavender essential oil and 15ml of Eau-de-GaNS-CO2.