Filter for contaminated water

You can make this a low-cost outdoor water filter; or a permanent installation in your house.

Take an empty plastic water bottle (or stocking or an old solid-screen-cartridge) and drill small holes in the bottom; the smaller the holes, the longer the water stays in the conditioner and the cleaner it will be.

  1. Cut a sponge to size, wash it with salt water and put it in the bottle
  2. Put crushed charcoal (or activated charcoal) peaces on top of the sponge wrapped in a stocking
  3. Dry CO2 GaNS and put in on top of the charcoal in it’s own stocking or micro woven cloth
  4. Dry CH3 GaNS and put it on top of the dry CO2 in it’s own stocking or micro woven cloth

Recycling Plastic

Most plastics are polymeres made from CH-bonds, hydro-carbons in other words. We know already from our GaNS-CO2 production that the nano-coated copper plate in interaction with the simple zinc plate attracts the carbon (C) from the atmosphere.

Now each plastic has a particular C; so we have to create a GaNS that matches this particular C-H bond of the plastic.

There is a way to create the field that is capable to extract the C out of the C-H bonds which will ‘disintegrate’ the plastic and release massive amounts of C and H into the atmosphere. One side effect will be huge amounts of water will be created in the wake of it (see red ellipse), which could become a problem of rising sea water levels, but could also become a blessing if we channel the H2O production into areas that need water so plants can grow.

The cleaning up of the huge plastic islands floating in our oceans can be done on a large scale with an airplane or satellite flying over the floating plastic masses and a submarine floating under it. Both create the interaction by carrying different concentrations of the GaNS in order to open the particular C-H bond.

To do this you have to create the GaNS of the plastic you want to remove and you will be able to clean up the planet in no time. By the way in our experiments with the coca-cola bottle-universe we saw already that the bottle neck dissolved; so we have done the opening of the C-H bonds already; we have to do it now in a more concise way. In the cola bottle experiment we took the H out to create H2 or H3; and then the C was liberated as well because it’s bonding partner was gone; that’s how the bottle neck disappeared. The liberated C got deposited as the graphene part of the nano-coating on the electrodes inside the bottle. We only have to open one of the bonds and the whole structure will fall apart.

We have already the knowledge of making a GaNS of any element in the Universe. You can make the GaNS of plastic by mixing 50g of caustic in hot water and pour it over some plastic pieces that you want to break apart; let it sit and do it’s job for 24hrs.

In the future we could produce water bottles based on this technology with an embedded bond that will dissolve on it’s own after a certain period of time. Then we can fabricate and use water bottles without having the pollution by it!

But there is one problem: some of the C-bonds are in the strength of the amino acids; that puts them very close to the structure of the life forms – and we do not want to dissolve the fishes and sea plants together with the plastic trash! More to learn 😉

Fukushima Nuclear Accident Cleanup

The original video is here

Nano-particles process

  1. Collect pieces of different (preferably corroded) metals like copper wire, copper pipe, chicken mesh, rusty nails and put them into a container with a tight lid

  2. Pour over caustic soda (NaOH) so it covers the bottom of the container

  3. Pour over hot water and rapidly close the lid

  4. Leave it in a warm spot for min. 24 hours

  5. Transfer all the nano-coated material into another container on a wire mesh and a little bit of caustic solution on the bottom (the atmosphere needs to be moist)

  6. Strip the voltage of the pieces and close the lid; repeat the stripping 4-6 times. Do not expose the nano materials to air!

The nano-coating process charges particles from the top layer of the material with a higher magnetic field; so they repel each other and create gaps. Inside the gaps the radioactive material can be trapped.

Decontaminate land or water:

Mix the soil with water and incorporate the nano-materials. Afterwards you attract all the nano-coated materials with the help of a magnet. Use the same procedure to decontaminate water.

GaNS process

Mix the GaNS-CO2 into radioactively contaminated water and allow it to settle. The radioactive material gets attached to the GaNS and settles with it to the bottom. The water on the top is totally clean without any contamination.

Field process

It is also possible to create the plasma of the material which causes the contamination. You can do this by dynamic reactors; they will attract and extract any materials or poisons from the environment.

Lake remediation

By Plasma-Laurentides

In 2010 we installed a floating island in order to stop the rapid aging of the lake we live on. In 2015 we started putting important amounts of GaNS and Liquid Plasmas into the water. We also positioned a star formation of LP-balls on the island as shown on the photo: The 3 bottom balls were filled with a mix of LP-CO2+ZnO; one with a 100% concentration, another with 50% and the 3rd with 25% concentration. Additionally we placed a ball with 100% LP-CH3 near the top of the old tree trunk; with one drop of the CH3 into the 3 base balls.

The remediation results are really astounding :

  • Transparency from 2.80m to 4.1m

  • Phosphate content fell from 14 μg/l to 2.70 μg/l.

  • Chlorophyll A fell from 3.90 μg/l to 1.70 μg/l

  • Dissolved Carbone from 4.5 mg/l to 3.2 mg/l

The tests have been performed by the Labs of the Government of Quebec between 2009 and 2017. Interpretation : the transparency is self evident; the other criteria show the ‘age’ of a lake – especially the phosphate : in the beginning of the analysis the lake was classified as between mesotrophe and eutrophe, which describes a situation where the lake is aging because there is more organic material than the lake can digest on its own. The results may be algae blooms, less transparent water and also fish dying of not enough oxygen or too high temperatures.

Now our lake has become much younger – almost oligotroph, a young lake!

Rivière Birim analyse des sédiments

Par Benjamin au Ghana

anal birim table

Une grande partie des éléments nécessaires pour le bon fonctionnement de notre corps sont traditionnellement apporté au corps humain en buvant de l’eau (originalement l’eau des rivières). Aujourd’hui que les rivières sont généralement très pollués, les éléments s’y trouvent dans des quantités malsaines.

Le nettoyage des eaux par le CuO par exemple remet ces quantité encore une fois dans une quantité harmonieuse pour notre santé. Ça veut dire avec le plasma on ne veut pas complètement éradiquer les éléments (polluants) mais on veut réduire leur concentration à un niveau qui est acceptable pour le corps humain!

La diminution de Hg est important; cela prouve que l’Eau-de-GaNS-CuO ou -CuO peut éliminer les métaux lourds dans le corps humain (Hg se présente par les blombages).

Ensuite les résultats pour la rivière Offin; le traitement était fait avec CuO.

anal offin table

Le 3e exemple est tiré d’un réservoir de poissons : le réservoir vert est le contrôle; le jaune est traité.

anal fishtank table

Les rivières sont pollué par l’industrie minière (or); alors on peut probablement récupérer des quantités d’or (pour financer le nettoyage) 😉